Logic pro 8 salae pro#
Logic pro 8 salae Pc#

Logic pro 8 salae pro#

In general, according to many characteristics, Logic Pro 8 has an advantage, especially in terms of the analog part. The sampling depth can be very large, but the DSLogic Pro buffer is also enough.

Logic pro 8 salae Pc#

The bigger the better, Logic Pro 8 uses PC memory. The thing is extremely useful especially for UBS 2.0 The more the better, this parameter determines how many samples the analyzer can capture without transferring them to the computer.

The more the better, the less leads there are to the studied circuit. Here Logic Pro 8 has three threshold voltage choices of 1.2V / 1.8V / 3.3V.Р”ВSLogic Pro has a choice from 0V to 5V in 0.1V increments, and it also has an overvoltage protection of -30V - + 30V. The bigger the better, but in case there is one caveat, but more on that below. Although the point is debatable, I will describe below why. USB 3.0 is preferable if you have it of course. Still, an oscilloscope is preferable for an analog, but sometimes it is convenient to see what is happening not only in the figure on the channel, but also in the analog. The more the better, but for a year of use more than 4 was not really needed so far Logic analyzers differ from each other mainly: by the number and type of channels, the presence of a buffer, and the sampling frequency.Р”Р„ small comparative table with the characteristics: To whom it became interesting welcome under cat. The logic analyzer essentially resembles an oscilloscope, but if the main task of the oscilloscope is toР”В¬hange in the analog signal with which it does a great job, then the goal of the logic analyzer is toР”Вigital (but not always only digital) signal with its subsequent analysis in convenient programs.Р”В«elow I will describe the experience with Saleae Logic Pro 8 logic analyzers at a price of about $ 480 and DSLogic Pro from DreamSourceLab (most likely a copy) at a price of $ 99 I got for $ 73. Much nicer is this task is solved using a logical analyzer.

In general, you can use a digital oscilloscope for this, but oscilloscopes with 4 channels are quite expensive, and itРІР‚в„ўs not very convenient.

To finally understand why everything is written 'correctly', but nothing works. Often when developing or debugging electronic devices consisting of several components (microcontroller, ADC, I2C memory, etc.), I want to look at the communication of these components with each other.